(11)
replacing the Environment Sensor
z
z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
z
z
pC boards are sensitive to static electricity. If a person handles a pC board while
charged with static electricity, the parts on the pC board may be damaged. before
handling a pC board, discharge the static electricity from your body; for example, by
touching the surface of grounded metal.
1
Turn off the power switch. (See “7-6-1 Turning the power Switch On” on page 31.)
2
remove the control panel. (See “8B-3-2 (8) removing and Installing the Control panel” on page
116.)
3
Disconnect the connector.
4
remove the two phillips pan head screws (with split washer) (M2 x 4), and replace the environment
sensor.
Connector
Environment sensor
Phillips pan head screw (with split washer)
(M2 x 4)
5
To install, perform the procedure in reverse.
8b. Service
120
- Must be performed by a technician -
WMT5DX取扱説明書_EN.indb 120
16/03/22 19:54
Summary of Contents for MAXIMUM TUNE 5DX PLUS
Page 186: ...WMT5DX _EN indb 184 16 03 22 19 55...
