Bandai Namco MAXIMUM TUNE 5DX PLUS, Operation Manual

Page: 23 / 186

7-3 pre-operation Inspection
Check the items below before starting machine operations.
If there is an abnormality, resolve it by referring to “8B-2 Troubleshooting” on page 94.
z z
before operating the machine, check the following locations. This is required to prevent accidents
or injuries.
z z
Operating the machine while parts are broken, damaged or deteriorated, or with defective installation,
may result in an injury to the player or other customers. If you discover an abnormality, replace the
affected part immediately.
To order parts, contact your distributor.
7-3-1 Safety Inspection (before power On)
(1) Are all warning labels in place? (See “1-4 Machine Warning labels” on page 3.)
(2) Are all warning labels legible? (See “1-4 Machine Warning labels” on page 3.)
(3) Are all level adjusters adjusted properly? (See “8A-2 level Adjuster Adjustment” on page 81.)
(4) Is the specified play zone provided? (See “5-1-2 Play Zone for the Installed Machine” on page 14.)
(5) Are the power cord and lAN cables laid out safely so they will not cause players or other customers to trip
over them?
(6) Are the seat slide rails (front-to-back slide) securely locked in position?
(7) Is the pedal boot damaged? (See “8B-3-6 (3) replacing the boot” on page 149.)
(8) Is the shift lever shutter damaged? (See “8B-3-5 (4) replacing the Shutter” on page 143.)
Inspect the following items after turning on the power switch. If you discover an abnormality, turn off the power switch
immediately to stop operations. Then, disconnect the power cord plug from the outlet and contact your distributor.
(9) Is any part of the power cord or plug abnormally hot?
(10) Does touching the machine give a tingling electric shock?
(11) Is there a burning smell, abnormal noise or vibration?
(12) Is there any other abnormality or malfunction?
7. Operation
21
1
2
3
4
5
6
7
8A
8B
9
10
11
12
Operation
Test Mode
Troubleshooting
WMT5DX取扱説明書_EN.indb 21 16/03/22 19:53