Bandai Namco MAXIMUM TUNE 5DX PLUS, Operation Manual

Page: 68 / 186

(a) INITIAlIZE SETTINGS
This screen can be used to initialize individual Test mode settings. Note that items set collectively by
the Wangan Terminal cannot be initialized.
1
In the OTHErS screen, select INITIAlIZE SETTINGS. The following screen appears.
2
Flip the Select switch up or down to select the item. The selected item blinks.
3
press the Enter switch to enter the selected item. The screen for the selected item appears.
4
When initialization is finished, flip the Select switch up or down to select EXIT and press the
Enter switch to return to the OTHErS screen.
INITIALIZE SETTINGS screen
INITIALIZE SETTINGS (DRIVER UNIT)
TIME
： ２０１６／０７／０３（
SUN
）１２：３４：５６
BOOKKEEPING INITIALIZE
(RETURN DRIVER UNIT BOOKKEEPING TO FACTORY SETTINGS)
INITIALIZE DRIVER UNIT OPTIONS
(RETURN UNSYNCED SETTINGS TO FACTORY SETTINGS)
EXIT
SELECT SWITCH : SELECT ENTER SWITCH : ENTER
（ａ）
（ｂ）
Item Description
(a) BOOKKEEpING INITIAlIZE Initialized contents (only within bookkeeping)
• All bookkeeping data
• All error log entries
(b) INITIAlIZE DrIVEr UNIT OpTIONS Initialized contents (not including collectively set items)
• Game options
• Analog interface initialize settings
• Sound level settings
• remaining credits, remaining service credits and
BANApASSpOrT cards purchased prior to Test mode activation
• play under the previous conditions displays
z z
After INITIAlIZE DrIvEr UNIT OpTIONS is executed, be sure to refer to “7-9
Adjustments after parts replacement (GO TO I/F INITIAlIZE)” on page 68 and
initialize the analog interfaces.
7. Operation
66
WMT5DX取扱説明書_EN.indb 66 16/03/22 19:54