Item
Description
Default
(a)
rESpONDING DrIVE
UNITS
This displays the number of communication-linked Driver Cabinets.
rESpONDING DrIVE UNITS <4>: proper communication by four
machines
rESpONDING DrIVE UNITS <3>: proper communication by
three machines
rESpONDING DrIVE UNITS <2>: proper communication by two
machines
rESpONDING DrIVE UNITS <1>: proper communication by one
machine
(b)
pCB ID and duplicate ID
notice display
This sets the pCB ID.
Setting range: 1
→
2
→
3
→
4
→
1...
When the same pCB ID is already in use by another Driver Cabinet,
the following notice appears.
<ErrOr: pCB ID CONFlICT CHANGE ID SETTING IN TEST
MODE>
1
(c)
IC CArD r/W USE
*1
Enables or disables use of the IC card r/W unit
ON: Uses the IC card r/W unit
OFF : Does not use the IC card r/W unit.
The title screen displays the message “BANApASSpOrT
CArD cannot currently be used”
ON
(d)
IC CArD VENDOr USE
*1
Enables or disables use of the IC card vendor
ON: Uses the IC card vendor
OFF : Does not use the IC card vendor.
The title screen displays the message “Cannot currently
purchase a BANApASSpOrT CArD”
ON
(e)
STEErING pOWEr
*1
Enables or disables the steering wheel feedback (reactive force)
feature.
ON
: provides feedback (reactive force) to the steering
wheel.
OFF
: Does not provide feedback (reactive force) to the
steering wheel.
ON
(f)
WINS AND rEMAINS
*2
Enables or disables the “remain as winner feature” for VS player
game.
ON
: Enables first place player to remain as winner in the
game.
(Only the first place player can continue playing the
game.)
OFF
: No player remains as the winner to continue playing.
(Game over for all players)
ON
*1
*2
When IC CArD r/W USE, IC CArD VENDOr USE and STEErING pOWEr are set to OFF, the corresponding
equipment cannot be tested in Test mode.
Even when the IC CArD r/W USE, IC CArD VENDOr USE and STEErING pOWEr settings are changed
from OFF to ON, the Test switch must be set to Off and the self-test performed in order to check the usage
and operation of the equipment.
Items for equipment that requires self-test are indicated by *1 in the table above.
The WINS AND rEMAINS setting is changed by collective setting using the Wangan Terminal. (See
“7-8-3 Game Cost and Free play Settings (COIN OpTIONS)” on page 40 of the “MAXIMUM TUNE 5DX
PLUS
WANGAN TErMINAl OpErATION MANUAl.)
7. Operation
44
WMT5DX取扱説明書_EN.indb 44
16/03/22 19:54
Summary of Contents for MAXIMUM TUNE 5DX PLUS
Page 186: ...WMT5DX _EN indb 184 16 03 22 19 55...
