(3) replacing the Micro switch
z
z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
1
Turn off the power switch. (See “7-6-1 Turning the power Switch On” on page 31.)
2
remove the shift (6-speed MT) assembly. (See “8B-3-5 (1) removing and Installing the Shift
(6-Speed MT) Assembly” on page 139.)
3
Disconnect the two connectors as shown in the figure.
4
Open the cable clip and release the two snap-in fasteners.
Connector
Cord clip
<To install>
<To remove>
Click!
Snap-in fasteners
Long-nose pliers
5
Remove the eight flange socket head bolts (M4 x 6).
Flange socket head
bolt
(M4 x 6)
Flange socket head bolt
(M4 x 6)
8b. Service
141
1
2
3
4
5
6
7
8A
8B
9
10
11
12
- Must be performed by a technician -
Test Mode
Troubleshooting
Removing and Installing
Assemblies and Parts
WMT5DX取扱説明書_EN.indb 141
16/03/22 19:55
Summary of Contents for MAXIMUM TUNE 5DX PLUS
Page 186: ...WMT5DX _EN indb 184 16 03 22 19 55...
