(2) replacing the pedal Assembly Analog Interface
The replacement method is the same for both the accelerator pedal and brake pedal.
z
z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
1
Turn off the power switch. (See “7-6-1 Turning the power Switch On” on page 31.)
2
remove the pedal assembly. (See “8B-3-6 (1) removing and Installing the pedal Assembly” on
page 146.)
3
Disconnect the connector.
4
remove the phillips pan head screw (with split washer) (M4 x 8), and remove the ground terminal.
5
Using an Allen wrench, loosen the hexagon socket head set screw (M4 x 8), and remove the
analog interface together with the interface bracket.
Interface bracket
Connector
Hexagon socket head set screw (M4 x 8)
Pedal assembly
Allen wrench
Cord clip
Phillips pan head screw
(with split washer)
(M4 x 8)
Ground wire
8b. Service
147
1
2
3
4
5
6
7
8A
8B
9
10
11
12
- Must be performed by a technician -
Test Mode
Troubleshooting
Removing and Installing
Assemblies and Parts
WMT5DX取扱説明書_EN.indb 147
16/03/22 19:55
Summary of Contents for MAXIMUM TUNE 5DX PLUS
Page 186: ...WMT5DX _EN indb 184 16 03 22 19 55...
