Section 2
General Information
General Information 2-1
MN1230
Introduction
Baldor Controls represent the latest technology in microprocessor based motor controls.
The Series 29M control adjusts current to produce maximum torque (to zero speed).
This provides instantaneous adjustment in response to the speed and position feedback
from a shaft mounted resolver.
A keypad interface is used to program the Series 29M parameters to customize your
application. The keypad is used to program the control parameters, set the mode of
operation, monitor the Local mode operation status, perform diagnostics, and examine
fault log.
Baldor has tried to ensure that the information in this manual is correct at the time of
printing. The information is subject to change without prior notice.
Figure 2-1 29M Control and Motor
AC Power
29M
Control
Motor
Feedback
Speed
Command
DB
Assembly
Summary of Contents for 29M
