INTRODUCTION
I-E96-401A
A - 1
APPENDIX A - IMMFP01 AND IMMFP02
MULTI-FUNCTION PROCESSOR
INTRODUCTION
The IMMFP01 and IMMFP02 Multi-Function Processor Mod-
ules have two configurable dipswitches and five jumpers. Fig-
ure
shows the dipswitch and jumper locations. The
dipswitches have eight positions. Dipswitch SW3 sets the mod-
ule address. Dipswitch SW4 sets the module options and spe-
cial operations. Tables
, and
list the dipswitch
settings.
Jumpers J1 through J4 are factory set with pin one and pin
two jumpered. Do not change J1 through J4 jumper settings.
Jumper J5 disconnects the -30 VDC supplied in earlier Net-
work 90 systems from the MFP module. Jumper J5 is factory
set with pin one and pin two jumpered. This setting allows the
module to function in systems with Network 90 power (-30
VDC supplied to modules). Connect pin two and pin three
together for proper Controlway operation. The two unlabeled
jumper pins located at the front of the board are for Bailey
Controls Company development personnel usage only. Do not
jumper these pins.
Figure A-1. IMMFP01/02 Module Layout
T00197A
MACHINE FAULT TIMER
JUMPER POSTS
JUMPERS AND POSTS
1 2 3 4 5
ON
6 7 8
1 2 3 4 5
ON
6 7 8
SW3
SW4
J5
J2
P1
P3
P2
J1
J3
J4
J5
CONTROLWAY
-30 VDC SYSTEM
(DEFAULT)
Summary of Contents for infi 90 NIMP01
Page 2: ......
