Bailey infi 90 NIMP01, Instruction

Page: 45 / 52

INTRODUCTION
I-E96-401A D - 1
APPENDIX D - INIIT02 INFI-NET TO INFI-NET
TRANSFER MODULE
INTRODUCTION
Two dipswitches must be set for the INIIT02 INFI-NET to
INFI-NET Transfer Module. The dipswitches set the module
operating characteristics. Figure
D-1 shows the board layout.
Tables D-1 and D-2 explain the dipswitch settings. Jumpers J1
through J4 are factory set. Do not change the jumper settings.
Figure D-1. INIIT02 Module Layout
STATUS LED
CPU LEDS
STOP/RESET PUSHBUTTON
MACHINE FAULT TIMER
JUMPER POSTS JUMPERS AND POSTS
T00328A
P1
P3
P2
J2
J1
J3
J4
SW3 SW4
1 2 3
1 1 4 4 3 3 2 2 7 7 5 5
OPEN OPEN
6 6 8 8
SW1
Table D-1. INIIT02 Dipswitch SW4 Options Settings
Position Setting Function
1 0 ROM checksumming enabled.
1 ROM checksumming disabled.
2 0 RS-232-C port in DCE mode.
1 RS-232-C port in DTE mode.
3 0 Equipment select output not energized.
1 Equipment select output energized.