0019-9376
Revision 0
59
Monoxor
®
XR User Manual
If the sensor’s output is low, but still usable, then the message “Good Calibration
WARNING Low Sensor” will appear. The sensor will now be marked as being Low in the
Warm-up screen.
If the sensor’s output is too low to be usable, then the message “Bad Calibration Sensor
End of Life, Entry Not Saved” will appear.
5. Close the regulator and remove the CO cylinder.
Figure 5-11:
Kit and Setup
5.7 T-Ref Sensor Calibration
The T-Ref sensor is located inside the instrument. Calibration is done at the factory and
should not need to be done in the field.
