0019-9376
Revision 0
6
Monoxor
®
XR User Manual
1.3 General Safety Statements
WARNING:
This analyzer is not intended to be used as a safety device.
WARNING:
When testing a combustion system, a full visual inspection should be
performed to ensure its safe operation.
CAUTION:
This analyzer is not intended to be used on a continuous basis.
CAUTION:
Do not store instrument or its sensors with solvents or products that
contain solvents.
CAUTION:
Except for sensor and battery replacement, this analyzer should only be
opened and/or serviced by authorized Bacharach personnel. Failure to comply may
void the warranty.
HAZARDOUS AREA WARNING:
This instrument has not been designed to be
intrinsically safe for use in areas classified as hazardous locations. For your safety,
DO
NOT
use it in hazardous
(classified)
locations.
CAUTION:
Do not use flammable or combustible substances
(like carburetor fluid used
for cleaning the probe)
near an open flame.
CAUTION:
When the instrument is used in an inefficient oil-fueled appliance where
there is a high emission of soot, the probe’s sample filter may become clogged. Before
every use check the filter to confirm it is clean or replace it with a new filter.
1.4 Product Overview
The Monoxor
®
XR is a portable hand-held carbon monoxide
(CO)
analyzer for use in
commercial and industrial applications. It is intended to be used by:
• Engine & service technicians
• Maintenance personnel
• Safety inspectors
• Propane forklift operators
to detect and display concentrations of CO gas between 0 and 80,000 ppm. The analyzer is
capable of testing for CO in both ambient room air and in the exhaust stream of fossil-fuel
fired combustion systems.
