0019-9376
Revision 0
38
Monoxor
®
XR User Manual
4.
Operation
4.1
Overview ......................................................................................................................... 40
4.2
Taking a Gas Sample ...................................................................................................... 41
4.3
The RUN and Hold Screens ........................................................................................... 42
4.4
CO Trending Graph ........................................................................................................ 43
4.6 Ending a Test .................................................................................................................. 44
4.7 Taking Differential Temperature Measurements
...................................................... 44
4.8 Timed Ambient CO Testing ........................................................................................... 45
4.9 Printing Using the Optional IrDA Printer .................................................................... 46
4.9 Turning Off the Analyzer
............................................................................................... 48
4.10
PC Interface and Fyrite
®
User Software
........................................................................
49
4.1 Overview
To operate the Monoxor
®
XR, you simply:
• Turn the analyzer ON
• Wait for the unit to warm up
• Take a gas sample
Before beginning your test, verify the following:
•
menu items are properly configured
•
the disposable filter is clean
• the probe is attached to the instrument
•
the power is ON and sufficient
(one of the following
):
• - four new batteries
(AA alkaline)
• - four new batteries
(AA lithium)
- four fully-charged AA rechargeable batteries
• the warm-up process has completed in fresh air without interruption or errors
