Baby Lock Urity BLTY Instruction And Reference Manual Download Page 327

Page: 327 / 332

UPGRADING YOUR MACHINE’S SOFTWARE

Main

nan

nd
Tr

oubl

hoo

ting

Appendix

A-23

Upgrade Procedure Using
Computer

While pressing the “Automatic Threading”
button, turn the main power to ON.

→

The following screen will appear on the LCD.

Press .

Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine.

→

“Removable Disk” will appear in “Computer (My
computer)”.

Copy the upgrade file to “Removable Disk”.

→

The following message will appear.

When the message disappears, press

→

The upgrade file is loaded.

Unplug the USB cable, and turn the
machine off and on again.

Note

• If an error occurs, a red text error message

will appear. When the installation is
performed successfully, following message
will appear.

Summary of Contents for Urity BLTY













































































































































































































































































































































Search results

Summary of Contents for Urity BLTY

Reviews:

Related manuals for Urity BLTY

Brands by name

Popular brands

Baby Lock Urity BLTY, Instruction And Reference Manual

Search results

Summary of Contents for Urity BLTY

Reviews:

Related manuals for Urity BLTY

Brands by name

Popular brands