Baby Lock Urity BLTY Instruction And Reference Manual Download Page 289

Page: 289 / 332

COMBINING PATTERNS

Em
br

oide

Ed
it

Embroidering

E-83

Sewing Combined Patterns

Combined patterns will be embroidered in the
order they were entered. In this example, the
embroidery order will be as follows:

→

Embroider

by following the

color order on the right side of the display.

→

After the flowers are embroidered, the [+] cursor
will move to the “Flower” part of the pattern.

Embroider .

Note

• Follow the directions in “Sewing Embroidery

Patterns” on page E-22.

Summary of Contents for Urity BLTY













































































































































































































































































































































Search results

Summary of Contents for Urity BLTY

Reviews:

Related manuals for Urity BLTY

Brands by name

Popular brands

Baby Lock Urity BLTY, Instruction And Reference Manual

Search results

Summary of Contents for Urity BLTY

Reviews:

Related manuals for Urity BLTY

Brands by name

Popular brands