Baby Lock Urity BLTY Instruction And Reference Manual Download Page 231

Page: 231 / 332

SEWING AN EMBROIDERY PATTERN

Em
br

oide

Embroidering

E-25

Press the “Start/Stop” button.

→

The appliqué will then be completed.

Change the upper thread and then carry out
the rest of the embroidering.

Memo

• Some patterns may not show all three

appliqué steps. Sometimes the
“APPLIQUE” step will be shown as a color.

Memo

• Some glue may get onto the presser foot,

needle, and needle plate at this time. Finish
embroidering the appliqué pattern and then
clean away the glue.

• For best sewing results clip all threads

between color steps.

Summary of Contents for Urity BLTY













































































































































































































































































































































Search results

Summary of Contents for Urity BLTY

Reviews:

Baby Lock Urity BLTY, Instruction And Reference Manual, Page: 231 / 332

Search results

Summary of Contents for Urity BLTY

Reviews: