A-Series Dobby Loom Assembly Manual
Installing Beams And Rollers
Cloth Storage System
Page | 75
2)
Place the roller in the bracket on the other side.
Figure 77 - Cloth Storage System Rollers
Cloth Take-Up Drum Assembly
1)
Find the Cloth Take-Up Drum Assembly (#30). There is a metal
ratchet and shaft attached to it. Using your Allen wrench, loosen
the set screw inside the ratchet and remove the ratchet and one
washer.
2)
From the outside of the loom, insert the shaft that's coming out
from the center of the drum, into the hole in the right front vertical
side frame member.
3)
Slide the washer, then the ratchet, back onto the shaft. The ratchet
should be facing so that the large flat face is toward the loom.
Figure 78 - Cloth Take-up Drum
4)
Now tighten the set screw and flip the wooden ratchet dog around
to intersect with the ratchet teeth.
