A-Series Dobby Loom Assembly Manual
Appendix I: Optional Equipment
Auto Advance System
Page | 135
For Bottom Swing Beaters: Attach the Beater Leg Bracket to the beater leg
1)
There should be eight holes already drilled into the beater leg.
2)
Holding the Bracket with the slide adjustment opening to your right,
line up the bottom hole with the first hole on the leg; the middle
hole on the Bracket aligns with the top (eighth hole) on the beater
leg.
3)
Put one washer on the hex bolt (3/8” x 2-1/4”) and put the bolt
through the top Bracket hole; then put on the second washer and
secure with the nut.
4)
Repeat this process with the shorter hex bolt (3/8” x 2”) and the
bottom hole on the Bracket.
For Overhead Beaters: Attach the Tilt Arm Bracket to the Tilt Arm
1)
There should be eight holes already drilled into the Tilt Arm.
2)
Holding the Bracket with the Side Adjustment opening to your right,
line up the bottom hole with the first hole on the Tilt Arm; the
middle hole on the Bracket aligns with the top hole on the Tilt Arm.
3)
Put one washer on each bolt. Put one bolt through the Top Bracket
hole; then put on the second washer and secure with the nut.
4)
Repeat this process for the bottom hole on the Bracket.
Figure 128 - Automatic Advance Gears in Place