A-Series Dobby Loom Assembly Manual
Appendix II: Air Assist Options
Installing An A-Lift
Page | 149
Return Cable
The dobby slide plate-to-spring lever cable is attached to the slide plate with
a quicklink in the eyebolt on the upper back right corner of the slide plate.
The cable goes over a small white plastic pulley with a retainer above it.
Figure 138 - A-Lift Return Cable
1)
The cable will go down the right side of the dobby back. Guide the
cable around the bottom of the return pulley on the cam-pulley
axle, then into the center of the loom.
Figure 139 – Position the Pulley
