78
ZM400 Series Indicators Service Manual
6
ADMIN level menus
If Wireless card is installed:
SSid
Use the alphanumeric entry methods described in 2.3 and
2.4 to enter a SSID network name.
SEcurtY
Select the type of security from this list:
None
WEP-64
WEP-128
WPA
WPA2
WEP.PASS
If WEP-64 or 128 is selected use the alphanumeric entry
methods described in
and
to enter a WEP security
password.
WPA.PASS
If WPA or WPA2 is selected use the alphanumeric entry
methods described in
and
to enter a WPA security
password.
The 802.11 wireless option requires the same setup as an Ethernet port and a Bind
setting of E-Net 1 thru 5 based on the Ethernet setup.
If External I/O card is installed:
GSE Select GSE for GSE 16 Position I/O Setpoint Option card.
1310 Select 1310 for 1310 16 Cutoff Expansion Board
The External I/O and AC/DC Inputs/Outputs options require Ztools to configure
This completes the service menus for the ZM400 indicator. See
to save the setup and return to normal weigh mode.
