Avery Weigh-Tronix ZM401, Service Manual

Page: 47 / 156

ZM400 Series Indicators Service Manual 47
6.3 Scale
Access the Scale menu. See Alphanumeric entry procedure (ZM401 only) on page 17 .
6.3.1 Scale 1-2
6.3.2 Capacity
6.3.3 Division
dViSion This stands for division size.
Choices are 0.000001 , 0.000002 , 0.000005 , 0.00001 , 0.00002 , 0.00005 ,
0.0001 , 0.0002 , 0.0005 , 0.001 , 0.002 , 0 .005 , 0.01 , 0.02 , 0.05 , 0.1 , 0.2 , 0.5 ,
1 , 2 , 5 , 10 , 20 , 50 , 100 , 200 and 500 . The default value is 1 .
The capacity that you enter should never exceed the rated capacity of the scale that is
connected.
Scale 1 Scale 2
ScALE 1-2 Select the scale to setup, ScALE 1 or
ScALE 2 .
The Num Scl menu item in the SYSTEM
menu, on page
64 must be set to 2 to access
Scale 2 settings
Capacty
Key in
scale capacity
cAPActY Key in a new capacity or accept the displayed
capacity.
0.000001 0.00002 0.00005
100
200 500
Dvision
to
Division sizes for other units of measure are automatically calculated by the indicator.