ZM400 Series Indicators Service Manual
63
6.4
System
6.4.11 Password
PASSWd
Use this to change the password for the
AdMin
,
diAg
and
cALib
menus.
6.4.12 Z-Lock
Z-LocK
This stands for zero lock. Use this to enable and configure the zero lock
feature during an automated weighing process. When enabled, if the scale
does not achieve a stable, gross zero condition some time within X
minutes (the time you configure), then the indicator locks up and displays
a message in three, one second displays:
Z-LocK PrESS ZEro
. The
operator must press
ZERO
to unlock the indicator.
EnAbLE
oFF
or
on
.
oFF
is the default.
timE
Use this to set the time value, in minutes, for this function. 60
minutes is the default
6.4.13 Beeper
bEEPEr
Use this to enable or disable the beeper sound when you press keys.
on
is the default.
Passwd
Admin
Diag
Calib
Key in
new PW
Key in
new PW
Key in
new PW
If the ADMIN password is changed, be sure to keep a record of it available for service
personnel or they may not be able to perform required maintenance when necessary.
Enable
On
Time
Z-Lock
Off
Key in time
in minutes
Beeper
Off
On
