Avery Berkel CX20 SERIES, Service Manual

Page: 298 / 353

Addendum A — Phase 1.4 and CX34 Parts List
A–11 CX20/CX30/CX34 Addendum A
A.4 Label formatting
Refer to Section 9 in the manual.
There is a new label field, number 24, which is for the new safe handling logo.
The new high resolution printer provides new fonts, 1 to 8, shown below (full
size):
A.5 Error messages
Refer to Section 10 in the manual.
See Table 10.1.
Message Meaning/What you should do
AUDIT 90% FULL The total number of transactions in the system has almost
reached the maximum permitted. You must either clear
audit transactions after printing audit totals or clear them.
NO PRINTER VOLTS Machine fault.
NO TARE SELECTED Tare interlock has been set on at the machine and you are
trying to print a label without first selecting a tare. Weigh
the goods in a container.
NOT AVAILABLE The function cannot be used at the machine.
OP. LOGGED OFF The operator key is switched off. Re–program the status of
the operator.
PRINT AUDIT You cannot continue using the machine because the
number of transactions has reached the maximum
permitted. You must either clear audit transactions after
printing audit totals or clear them.