Avery Berkel CX20 SERIES, Service Manual

Page: 101 / 353

9 — Label Formats
9–10 CX20/CX30/CX34 Service Manual
9.2.7 Determining the Start Point of a 180 Degree Format
To determine the start point for the a 180
°
label format carry out the following
(refer to Figure 9.6):
1 From the right–hand edge of the label, measure 53.5 mm to the left in
the plane of the X axis.
2 Draw in the Y axis through this point.
3 Draw in the X axis along the bottom edge of the label.
The start point is the point of intersection between the X and Y axes.
Figure 9.6 Determining the Start Point (180 Degree Format)
Y axis
Start point
X axis
53.5 mm
Right–hand edge of
label