Avaya Octel 200 Installation And Maintenance Manual Download Page 45

Page: 45 / 687

INSTALL

1-17

Octel 200/300

S.4.1

PB60019

−

Port INFORMATION Table Indexes

The following indexes are applicable to port INFORMATION Tables. Refer to the

Configuration

volume, Information Table chapter, for details about each index.

Index 1.

Each port/trunk INFORMATION Table must have an intercept position. The mailbox

must already exist in the USER Table.

INTERCEPT MAILBOX
(

1−

8 digits

)

Index 2.

A company greeting mailbox can be configured. If a mailbox number is not entered,

the manufacturer’s recorded generic greeting is used.

COMPANY GREETING MAILBOX

(

1−

8 digits, N = NONE, empty line = NONE

)

Index 3.

The following index appears if the Incoming Call Restriction option is installed.

CALL BLOCKING NUMBER

−

255, 0 = NONE, empty line = NONE)

Indexes 4 and 5.

The following indexes appear if Single Digit Menus are used. Index 5 is not

listed if index 4 is NONE.

MAX DIGIT FOR MENU

−

8, 0 = NONE, empty line = NONE)

PREFIX DIGIT FOR MENU

(

1−

7 DIGITS, N = NONE, empty line = NONE)

:XX
WARNING: The following MAILBOXES must exist in the USER TABLE or in a
COLOCATED cabinet:

Indexes 6, 7, 9, 10, and 18.

The following five indexes are listed.

Summary of Contents for Octel 200
















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Octel 200

Reviews:

Brands by name

Popular brands

Avaya Octel 200, Installation And Maintenance Manual

Search results

Summary of Contents for Octel 200

Reviews:

Brands by name

Popular brands