Avaya Octel 200, Installation And Maintenance Manual

Page: 422 / 687

8-36
Installation and Maintenance
Volume
Octel 200/300 S.4.1 PB60019 − 01
Table 8-2 Hardware Error Types and Remedies (continued)
Error Type:Name Priority Remedy Source
66. LAN Reported
Hardware Error
(continued)
Problem detected by
the LAN.
Dependent on the DATA-1 values as
described below.
3
05 = SNMP MANAGER HOST NAME CANNOT BE RESOLVED
Possible reasons include:
-
Manager host name may be bad.
-
Name server IP address may be bad.
-
The Octel 200/300 cannot communicate with the name server.
-
Other — error code in
DATA-2
and
DATA-3
gives more
information.
REMEDY:
Correct the SNMP manager host name.
-
Correct the name server IP address.
-
Configure the SNMP manager IP address.
DATA-2
= 1, 2, or 3. This tells us where the error was logged
from.
DATA-3
and
DATA-4
together give 16 bits of error
information.
06 = BAD_SUBNET
The subnet mask for self is not configured correctly.
.
Most common reason is that the subnet mask has never been
configured. The subnet mask is configured for SELF only, and the
value configured is shown went the
L Loc
command is issued.
REMEDY:
Get the correct IP address from the LAN administrator
and reconfigure the message server
07 = DUP_IPADDR — IP ADDRESS CONFLICT.
There is another system with the same IP address in the subnetwork
that includes the message server.
REMEDY:
Get the correct IP address from the LAN administrator
and configure it in the definition of SELF.
DATA-2
= ERROR DATA
DATA-3 = ERROR DATA
DATA-4 = ERROR DATA
67 Patching Error Dependent on value in
DATA-4.
Contact your technical support center. 3
DATA-4 = 01 PARTIAL PATCH DETECTED
02 PATCH AREA ALLOCATION ERROR