Avaya Octel 200, Installation And Maintenance Manual

Page: 322 / 687

7-12
Installation and Maintenance
Volume
Octel 200/300 S.4.1 PB60019 − 01
@ L T 6
Enter start time : Year Month Day Hour Minute or C (continuous)
:
MM/DD/YY
HH:MM:SS PRT TYPE EVENT AUX MBX/EXTN MSG# SL U L SOURCE
04/05/00 09:56:23 040 INTG_C FWD_INT BUSY 4373 09 1 4 1 705
04/05/00 09:57:49 04 1 INTG_C DIR_EXT 800 1 0 1 1
04/05/00 9:57:54 040 INTG_C ONHOOK 09 1 4
04/05/00 09:58: 1 6 043 INTG_C FWD_EXT NO_ANSWER 4334 1 0 1 3 1 00
Option 7: Aplink Activity
Select
7
to display Works for Serenade system activity. The activities displayed are:
-
LOST. The data link between the Octel 200/300 CPU and the Works for Serenade system is down.
-
SYNC. The data link is restored.
Using the LOG PR CPT Command
The
LOG PR CPT
command displays the same activities as are filtered with
LIST TRACE.
With the
LOG PR CPT
command, different combinations of print options and filters can be specified to
consolidate information and focus the display on specific types of trace activities. Use
LOG PR CPT
to
do the following:
-
Set filter for records with
FAX_CHN
and
FAX_MSG.
-
Set start and end times for any trace.
-
Review timing and sequence of all high-level communication to and from the LAN for Digital
Networking.
To use the
LOG
command for CPT activities, at the @ prompt, enter:
LOG PR CPT
Enter
.
@LOG PR CPT
Specify Print Option(s):
“S”tart <time>, “E”nd <time>, “L”ine <length>, “p”age <length> “\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D 1 D2 D3 D4 D5
Refer to the Log Command section for an explanation of LOG print options.