Avaya Octel 200 Installation And Maintenance Manual Download Page 241

Page: 241 / 687

Quick Reference Guide

Octel 200/300

Maintenance Commands

Octel 200/300

S.4.1

PB60019

−

Command

Type

Information

Command

Subject

Miscellaneous

Commands

(continued)

Port Status

PS x

Displays current state of the ports.

x = non-zero for continuous (optional)

Restart

RESTA

Restarts CPU. All active ports and the modem are

dropped. The maintenance level password must be
entered before restart begins.

Restart

RESTA 2

Restarts CPU. Reloads software from the hard disk.

All active ports and modem are dropped.

Integrations

Integration trace information is logged to the

message server’s call-processing trace log file.

APIC or NPIC

SDBUG xx

xx is the slot number and yy is either 7F to turn on

debug or 00 to turn off.

All other integrations

SDBG xx yy zz

xx is the slot number, yy is the unit number, 11 is

the link number, and zz is either 7F to turn on
debug or 00 to turn off.

Network Time

TIME

Displays the current system date and time. Used

only at the @ prompt.

Integration Cards

UPINTG

Restarts integration cards and disrupts call

processing for approximately one to two minutes.

VCU

Connects to the VCU software and provides

detailed drive status, drive configuration, message
header information on installed hardware. From
this command you can enter the

L DMAP

command to get more details.

Write Protect Drive

WPDISK

Write protects a disk drive to prevent any new

messages from being created on that drive.

Summary of Contents for Octel 200
















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Octel 200

Reviews:

Brands by name

Popular brands

Avaya Octel 200, Installation And Maintenance Manual

Search results

Summary of Contents for Octel 200

Reviews:

Brands by name

Popular brands