Avaya Octel 200 Installation And Maintenance Manual Download Page 191

Page: 191 / 687

5-4

Installation and Maintenance

Volume

Octel 200/300

S.4.1

PB60019

−

If 1

−

8 digits are entered, the list displays the mailboxes beginning with the digit(s) entered. In this

example the first digit is 5 and mailboxes are three digits long:

Entered Digits

Mailboxes Displayed

All mailboxes beginning with 5

All mailboxes beginning with 56

567

Only mailbox 567

All user reports are sorted by first digit. For example, if mailboxes in the 2000 and 300 series are used,
2000 lists first.

The following screen shows an example of the system response when an invalid digit sequence is entered.

NO MATCH FOUND
OCCMP_@

Clearing a Report

To clear reports, at the @ prompt enter

CLEAR REPORT

, or

C R

After this command is entered, following prompt displays:

SYSTEM PERFORMANCE (IN TRAFFIC PEGS) AND PORT STATISTICS.

NETWORK TRAFFIC.

USER MESSAGE, USER CALLING AND MAILBOX USAGE.

SELECT REPORT TO BE CLEARED.(

1 −

3, EMPTY LINE = EXIT)

Select the number of the report type you wish to clear. The prompts displayed after selecting a report are
specific to that report type.

Summary of Contents for Octel 200
















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Octel 200

Reviews:

Brands by name

Popular brands

Avaya Octel 200, Installation And Maintenance Manual

Search results

Summary of Contents for Octel 200

Reviews:

Brands by name

Popular brands