Avaya Octel 200 Installation And Maintenance Manual Download Page 444

Page: 444 / 687

8-58

Installation and Maintenance

Volume

Octel 200/300

S.4.1

PB60019

−

Description

280

OCTELNET ASCII NAME SEND SUCCESSES

The number of successful attempts the Octel 200/300 made to send an alphabetic

(ASCII) name over Protocol 5.

281

OCTELNET ASCII NAME RECEIVE ATTEMPTS

The number of attempts the Octel 200/300 made to receive an alphabetic (ASCII)

name over Protocol 5.

282

OCTELNET ASCII NAME RECEIVE SUCCESSES

The number of successful attempts the Octel 200/300 made to receive an

alphabetic (ASCII) name over Protocol 5.

283

NUMBER OF DIGITAL NETWORK FAX MESSAGES SENT SUCCESSFULLY

The number of digital network fax messages sent successfully. Fax messages

include voice-annotated fax messages.

284

NUMBER OF DIGITAL NETWORK FAX MESSAGES RECEIVED SUCCESSFULLY

The number of digital network fax messages received successfully. Fax messages

include voice-annotated fax messages.

285

OFFSITE/MESSAGE WAITING END DIGITS FAIL

The number of times the offsite outcalling end digits specified through System

Parameter 259 — DIGIT STRING AT END OF OFFSITE/PAGER DIGITS, failed.

290

GATEWAY LINK

−

NEW CALL FOR LOGON

The number of times a logon control is transferred to the OctelAccess server.

291

GATEWAY LINK

−

NEW CALL FOR LOGOFF

The number of times a logoff control is transferred to the OctelAccess server.

292

GATEWAY LINK

−

STANDARD NEW CALL

The number of times a new call is transferred to the OctelAccess server control.

293

GATEWAY LINK

−

NEW CALLS NOT CLAIMED BY THE GATEWAY

Number of times an attempt to transfer call control to the OctelAccess server

failed because no gateway assumed control of the new call.

294

GATEWAY LINK

−

NUMBER OF SESSIONS ESTABLISHED BY THE GATEWAY

The number of sessions established by the OctelAccess server. This is the number

of applications that have connected to the message server.

295

GATEWAY LINK

−

OUTCALLS INITIATED BY CLIENTS

The number of outcalls made using the OctelAccess server. This is a count of the

number of times applications made outcalls through the OctelAccess server.

296

GATEWAY LINK

−

FAXES DELIVERED FOR CLIENTS

The number of faxes delivered for applications using the OctelAccess server.

297

GATEWAY LINK

−

FAX MESSAGES TRANSFERRED TO THE GATEWAY

This is a count of the number of times the OctelAccess server used the file transfer

feature to transfer a fax message from Octel 200/300 to the OctelAccess server.

Summary of Contents for Octel 200
















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Octel 200

Reviews:

Brands by name

Popular brands

Avaya Octel 200, Installation And Maintenance Manual

Search results

Summary of Contents for Octel 200

Reviews:

Brands by name

Popular brands