Avaya Octel 200, Installation And Maintenance Manual

Page: 391 / 687

System Errors and Traffic Pegs 8-5
Octel 200/300 S.4.1 PB60019 − 01
8.2 HARDWARE ERRORS
The Octel 200/300 logs each hardware error, along with its date, time, and type, in the Hardware Error
Table. This section explains how to read and interpret the information in the Hardware Error Table. It
also suggests some probable causes and remedies.
-
The command
LIST HARDWARE
is used to list the Hardware Error Table. From the @ prompt, enter
L H
Enter
-
The command
CLEAR HARDWARE
is used to clear the Hardware Error Table. From the @ prompt,
enter
C H
Enter
-
For some hardware errors it may be necessary to translate the error bits into the error code. To
display which bits are set in a HEXadecimal number (max 16 bits), from the @ prompt, enter
BITTST x
where
x
is a hexadecimal number.
An
example to see which bits are set in the hex number 1234:
@
BITTST 1234
BIT 2 IS SET
BIT 4 IS SET
BIT 5 IS SET
BIT 9 IS SET
BIT 1 2 IS SET
@
Hardware Error Table example and field description:
@L H
THU MM/DD 22:29:56
YYYY E 1 _ISDN ID:200444 S/N:200003 PBX:32
CLEARED: 08/26 11 :02
TYPE SLOT CHNL PRIO DATE TIME #BAD DATA 1 DATA2 DATA3 DATA4
0 1 09 00 1 0 1 /2 1 04:24 1 0000000 1 00000000 00000034 00000007
0 1 09 00 1 0 1 /2 1 04:25 1 0000000 1 0000000 1 00000034 00000007
0 1 09 00 1 0 1 /2 1 04:25 1 0000000 1 00000002 00000034 00000007
@
-
TYPE.
Range 1 − nn. Indicates which hardware assembly detected an error or failed to perform a
function. See Table 8-2.
-
SLOT. Where applicable, shows slot number in which the PCA was installed when the error was
reported.
-
CHNL. Indicates the number of the failed channel.
.
For Error #24 only,
CHNL 1 refers to unit 1
CHNL 2 refers to unit 2