Avaya J159 User Manual Download

Page: 80 / 149

The call is unparked.

Call Retrieve

With the Call Retrieve feature, you can seamlessly pull a call from its current location to the

primary location of your BroadWorks business number. You can also pull an active call from your

mobile phone to your IP phone or a soft phone. To do this, you must have the multiple appearance

service active on your BroadWorks business number. You can retrieve a call using the Call

Retrieve feature menu or by using the FAC code.

Note:

The Call Retrieve feature is available only if either BroadWorks Anywhere feature or

BroadWorks Mobility feature is enabled.

Limitations

The following are the limitations for the Call Retrieve feature:

• If you are on an active call and receive another call, you can answer that call from the

configured location. To retrieve this call from its current location using the Call Retrieve

feature, place the current call on hold and then press

Call Retrieve

• Disable Broadworks Call Control Services for the Call Retrieve feature to function properly.

To disable Call Control Services, toggle

BroadWorks call control

to off. See

Changing

location details

on page 58 or

Editing Mobile identity alerting

on page 62 for more details.

Using Call Retrieve

About this task

Use this procedure to retrieve a call from your logged in location.

Before you begin

Ensure that at least one of the multiple appearance services is active.

Procedure

1. Press

Main menu

2. Scroll to

Features

, and press

Select

3. Scroll to

Call retrieve

, and press

Select

Call Transfer

With the Call Transfer feature, you can transfer your call to another destination number.

Advanced features

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

Comments on this document? [email protected]

Summary of Contents for J159






















































































































































Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands

Avaya J159, User Manual

Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands