Avaya J159 Page 73 User Manual Download

Page: 73 / 149

• The corresponding line key

3. Scroll to

Call forward busy

feature, and press one of the following:

•

Enable

•

4. In the

Destination

field, enter the call forwarding number.

5. Press

Enter

Forwarding unanswered calls

About this task

Forward incoming calls that are not answered at the primary number to a specific call forwarding

number.

Before you begin

Ensure that the administrator enabled the call forwarding feature.

Procedure

1. Press

Main menu

2. Scroll to

Features

, and press one of the following:

•

Select

•

• The corresponding line key

3. Scroll to the

Call forward-NA

feature, and press one of the following:

•

Config

•

4. Configure the following fields:

•

Destination

: Enter the call forwarding number.

•

Number of rings

: Enter the number of rings after which the call is forwarded.

5. Press

Save

6. Press

Enable

Call Park

Using the Call Park feature, you can park an active call at a parking extension. You can dial the
parked extension number from any phone to retrieve the call.

Call Park

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

Comments on this document? [email protected]

Summary of Contents for J159






















































































































































Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands

Avaya J159, User Manual

Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands