manualshive.com logo in svg

Avaya J159, User Manual

Share
Download
Avaya J159 User Manual Download Page 56

DND icons

The following table displays the DND icons for the Avaya J100 Series IP Phones.

State

Phone icons

DND

DND ring reminder

Activating the screen saver

Procedure

1. Press 

Main menu

.

2. Press 

Applications

.

3. Scroll down to 

Activate screen saver

, and press 

Select

.

Anonymous Call Block

With the Anonymous Call Block feature, you can reject calls from anonymous parties who have
explicitly restricted their caller ID. Callers without caller identification are informed that you are not
accepting calls. Your phone will not display any audio or visual notification of the attempted call.
The calling party will hear the following announcement: “The party you are trying to reach does not
accept unidentified call, please try your call again later”.

Important:

This feature is not applied to calls from or within the group.

BroadWorks Anywhere

With the BroadWorks Anywhere feature, you can make and receive calls using any phone from

any location. You can use this feature to:

• Configure other phones to work in conjunction with your business phone.
• Make calls from phones using your BroadWorks business phone number as the Calling Line

ID.

• Move calls across phones.

Advanced features

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

56

Comments on this document? [email protected]

Summary of Contents for J159






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands