Avaya J159 Page 63 User Manual Download

Page: 63 / 149

•

Include executive assistant

•

Mobile identities alerted

Mobile identity alerting field description

Name

Description

Specifies the description of the mobility number.

To change the description, press

Backspac

and

edit the description.

Alert agent calls

Specifies that the mobile is alerted for group and
virtual service calls.

Alert click to dial calls

Specifies that the mobile is alerted for a click to dial
call.

Alert group paging calls

Specifies that the mobile is alerted for group paging
call.

Use mobility calling line ID

Specifies that the mobile number is used as the
calling line identity when a call is made from this
mobile device.

BroadWorks call control

Specifies that the call control is with the
BroadWorks and not with the mobile device.

Use diversion inhibitor

Specifies that the call is not redirected for an
unanswered call.

Answer confirmation required

Specifies that a confirmation digit is required after a
mobile call leg is answered.

Device to ring

Specifies that the device must ring when the phone
number gets a call.

Use the

Right Arrow

Left Arrow

key to select

one of the following:

•

Fixed

: To set the office phone or fixed devices to

ring when the phone number gets a call.

You can select SCA, BroadWorks Anywhere, and
executive location for fixed.

•

Mobile

: To set the mobile phone to ring when the

phone number gets a call.

•

Both

: To set both the mobile phone and the fixed

device to ring when the phone number gets a call.

Include shared call appearance

Specifies that all SCA devices are alerted.

Ensure to set

Device to ring

to either

Fixed

Both

Table continues…

BroadWorks Mobility

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

Comments on this document? [email protected]

Summary of Contents for J159






















































































































































Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands

Avaya J159, User Manual

Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands