manualshive.com logo in svg

Avaya J159, User Manual, Page: 45 / 149

Share
Download
Avaya J159 User Manual Download Page 45

Chapter 9: Recents

Call log

Depending on the call type, call log provides the following information about the last 100 calls on
your phone:

• Caller name

• Caller number

• Call time-stamp

• Call duration

Avaya J100 Series IP Phones software version 4.0.3 and later always encrypts the content of the
call log file.

If you downgrade the software of your phone to a version earlier than 4.0.3, you will lose the call
log details.

Making a call from Recents

Procedure

1. Press 

Recents

.

2. Use the 

Up

 and 

Down Arrow

 keys to select the contact that you want to call.

3. Press 

Call

.

Viewing the Recents details

About this task

In the Recents screen, depending upon the call type, you can view the following details of each

call:

• Incoming call icon
• Outgoing call icon

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

45

Comments on this document? [email protected]

Summary of Contents for J159






















































































































































Reviews:

No comments