Avaya J159 User Manual Download

Page: 114 / 149

•

None

: The phone disables the mute alert.

6. Press

Save

Visual alerting

The beacon LED works in the following manner to indicate incoming calls and messages:

• If there is an incoming call, the beacon LED blinks.
• If there are new voice mail messages, the beacon LED is lit continuously.
• If the speaker is on during an active call and there are new voice mail messages, the beacon

LED turns off every 15 seconds.

Note:

If the call is on hold, the beacon LED stops flashing.

Related links

Setting Visual alerting

on page 114

Setting Visual alerting

About this task

Use this procedure to illuminate the beacon LED when there are incoming calls and messages.

Procedure

1. Press

Main menu

2. Scroll to

Settings

, and press

Select

3. Scroll to

Phone

, and press

Select

4. Scroll to

Alerting on calls

, and press

Select

5. Scroll to

Beacon LED

6. Press

Toggle

to enable or disable visual alerting.

7. Press

Save

Related links

Visual alerting

on page 114

Customizing phone keys

About this task

Use this procedure to add, relabel, move, or delete contacts, features, or applications from the

Phone screen.

Customization

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

114

Comments on this document? [email protected]

Summary of Contents for J159






















































































































































Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands

Avaya J159, User Manual

Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands