Avaya J159 User Manual Download

Page: 137 / 149

Procedure

1. Press

Main menu

2. Scroll to

Settings

, and press

Select

3. Scroll to

Network

, and press

Select

4. To access the list of available Wi-Fi networks, scroll to

Wi-Fi network

, and press

Select

5. Scroll to the required

Wi-Fi network

, and press

Connect

to start the connection process.

6. Press

to restart the phone.

7. If the security is WEP or WPA/WPA2 PSK, in

Password

, enter the password for the Wi-Fi

network.

8. If the security is 802.1x EAP, enter the following:

•

Identity

: Either your personal user ID or the shared user ID provided by your system

administrator.

•

Anonymous Identity

: Leave blank or use the shared Anonymous Identity provided by

your system administrator.

•

Password

: Either your personal password or the shared password provided by your

system administrator.

Result

If the credentials are authenticated successfully, the phone automatically restarts to complete the

connection.

Related links

Setting the network mode

on page 134

Setting the network mode

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

137

Comments on this document? [email protected]

Summary of Contents for J159






















































































































































Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands

Avaya J159, User Manual

Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands