Product Description
IP Office 8.1
© 2012 AVAYA All rights reserved.
Page 69
Issue 26.k.- (16 August 2012)
Message Alert Notification
Message Alert Notification allows any ETR or Digital telephone, programmed with Auto Intercom buttons, to see
which users have new messages waiting in their mailbox.
When the Message Alert Notification button is pressed, the DSS/BLF buttons programmed on the user’s
telephone will display a flashing red LED when the associated user has new voice mails waiting.
This feature may be left on at all times or deactivated by pressing the Message Alert button again.
Music on Hold
Connect an audio source to the Music-On-Hold port on the processor module so that a caller hears music when
placed on hold when the Music-On-Hold feature has been activated.
Night Service
When Night Service is on and a call comes in, all extensions in the Night Service Group ring immediately,
regardless of normal Line Ringing settings.
One-Touch Transfer
This feature allows a user to automatically transfer a connected call with one-touch -- by pressing a pre-
programmed Auto Dial Intercom for the destination extension. (The Transfer button is not used.)
·
The transfer is completed when the transferring station goes on-hook, or touches the Transfer button
or Complete soft-key.
·
The user initiating the transfer is able to consult and complete the transfer or blind transfer after
successfully initiating a one-touch transfer.
The LEDs at the phone initiating the transfer, as well as other appearances of the call in the system, behave the
same as if the user touched the Transfer button to initiate the transfer.
Paging Features
·
Loudspeaker Paging - Users can initiate a call (either manually dialed or intercom auto dialed) to an
extension connected to an analog station port that connects them to an external loudspeaker paging
system.
·
Simultaneous Paging is a feature that pages both the external loudspeaker paging system (via the
paging port) as well as voice signals all of the extensions in Calling Group 1.
PBX Mode
The system can operate in Key System mode (default) where all lines appear on all telephones; or can be
administered to operate in PBX-mode. PBX-mode provides three Intercom buttons per telephone which work
similar to System Access buttons (provides intercom dial tone, dial 9 to access an outside line).
Note: On PARTNER ETR sets, the system provides two Intercom buttons per telephone.
Personal Line Termination
Allows you to assign a line / lines to specific extension / extensions.
Personalized Station Ringing
Allows you to assign a personalized ring pattern to an extension