Product Description
IP Office 8.1
© 2012 AVAYA All rights reserved.
Page 390
Issue 26.k.- (16 August 2012)
Mobile Call Control
This allows a user who has answered a twinned call on their mobile/cell phone to dial a DTMF sequence **
(star-star) to put the call on hold and receive IP Office system dial tone. The user will then be able to perform
supervised and un-supervised transfers, shuttle (switch between held calls), and conference (Conference add
and transfer to a meet-me conference).
Mobile Call Control is a mobility feature similar to but independent of one-X Mobile Essential. It allows any
mobile phone user to access IP Office features without using the one-X Mobile Essential client application.
Mobile users can gain access to the "Star Star Service" dial tone when they receive a twinned call. After
receiving a twinned call, the mobile user can dial ** to place that call on hold and get dial tone from the IP
Office. Once the mobile user receives IP Office dial tone, any subsequent dialing tone is interpreted as if the
user is logged into an analog extension on the IP Office.
To gain access to the "Star Star Service" dial tone, the mobile user can dial the FNE 31 DID/DDI that has been
programmed in the IP Office. Similarly, once dial tone is heard, the user can dial numbers and short codes as if
the user is logged into an analog extension on the IP Office.
Mobile Call Control and one-X Mobile Essential require twinned calls to be routed through specific trunk types on
IP500 / IP500 V2 only:
·
IP500 PRI-U (single or dual) trunk cards
·
IP500 Dual or Quad BRI trunk cards
·
SIP trunks (RFC 2833)