Avaya Cajun P333T, User Manual, Page: 71 / 182

Chapter 6 CLI – Layer 2
Avaya P333T User’s Guide 55
show port blocking
Use the
show port blocking
command to display the port blocking mode on a
particular switch. Use the
session
command to change switches before using this
command.
The
show port blocking
command is used with the
show self-loop discovery
command to confirm a port’s blocking mode.
The syntax for this command is:
show port blocking
Note:
This command is not supported by the P330-ML switches.
Note: If this command is to be implemented on a switch other than the stack master,
a session should be opened to the relevant switch.