Avaya Cajun P333T, User Manual, Page: 143 / 182

Chapter 6 CLI – Layer 2
Avaya P333T User’s Guide 127
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
rmon alarm
Use the
rmon alarm
command to create a new RMON alarm entry.
The syntax for this command is:
rmon alarm <Alarm Number> <variable> <interval> <sampletype>
rising-threshold <rising threshold> <rising event> falling-
threshold <falling threshold> <falling event> <startup alarm>
<owner>
Output Example:
P330-N# rmon alarm 1026 1.3.6.1.2.1.16.1.1.1.5.1026 60 delta
rising-threshold 10000 1054 falling-threshold 10 1054
risingOrFalling amir
alarm number This is the alarm index number of this entry (it is advisable to
use the same interface number as your alarm index number.)
variable This is the MIB variable which will be sampled by the alarm
entry.
interval The interval between 2 samples.
sample type This can be set to either delta (the difference between 2
samples) or an absolute value.
rising threshold This sets the upper threshold for the alarm entry.
rising event The RMON event entry that will be notified if the upper
threshold is passed.
falling
threshold This sets the lower threshold for the alarm entry.
falling event The RMON event entry that will be notified if the lower
threshold is passed.
startup alarm The instances in which the alarm will be activated. The
possible parameters are: Rising, Falling, risingOrfalling.
owner Owner name string.