AUTOCAR Xspotter 2014, Operator'S Manual

Page: 36 / 118

Step 8: Left Saddle Tank and
Hydraulic Tank Area
Diesel Vehicles
Left Fuel Tank
• Tanks securely mounted and not damaged
or leaking.
• Fuel lines secure and not leaking. Check
that shutoff valves are open.
• Check that tank(s) is full of fuel; cap on and
secure.
CNG Vehicles
• Open the fuel control panel door and turn
the fuel shutoff valve to the ON position.
•
Verify that the truck’s CNG cylinders are full
by checking the high-pressure gauge.
• Open the drain valve on the low-pressure
(engine) fuel filter and drain any oil from the
filter. Close the valve securely.
LNG Vehicles
• Check the fuel pressure gauge for the
proper tank pressure.
•
Verify the filler port cap is installed properly.
• Check that the tank is securely mounted,
not damaged or leaking.
• Inspect fuel shutoff valve and turn it to the
ON position.
• Open the drain valve on the low-pressure
(engine) fuel filter and drain any oil from the
filter. Close the valve securely.
CAUTION
ALWAYS wear appropriate eye protection
to prevent the risk of eye injury. Wear
safety glasses to prevent eye contact with
debris and fluids.
Left Hydraulic Tank
• Tank securely mounted and not damaged
or leaking.
• Hydraulic lines secure and not leaking.
• Check hydraulic tank sight gauge. The
hydraulic level should be in the middle of
the sight glass.
•
Check hydraulic filter restriction gauge. If
necessary, service/replace filter.
In the Cab
• Check steps and grab handles for
looseness or breakage. Also, clean them
if there is any substance that makes
them slippery, which makes cab entry/exit
hazardous.
• Start the engine. If equipped, check that
exhaust rain cap opens when accelerating
engine.
• Check gauge and warning light function.
• Check function of the low air warning.
• Check the dash display for any malfunction
indicators.
• Check windshield wipers, washers and
horns, including back-up alarm, if equipped.
• Clean inside windshield, door windows and
instruments. Clean mirrors.
• Check climate control and defroster. If
equipped, check mirror heater.
• Check the condition of warning triangles,
fire extinguisher and flares. Ensure that
safety devices are properly secured in the
cab.
• Adjust the seat. Check mirror adjustment.
• Check safety belts for function and damage.
• Apply service brakes. After the initial drop,
pressure should hold steady or increase
slightly, with engine at idle.
• Check steering for excessive free play.
• Verify the boom raises and lowers properly.
• Check for loose items in the cab. Secure
them if necessary.
877-973-3486 AWE 00054 Rev. 002 24
ACTT Xspotter Operator Manual