• Do not hold anything in your hands when
entering or exiting the cab or the area
behind the cab. Place log books, cups,
clipboards, jackets, luggage, etc., on the
cab floor
or rear deck plate before entering
or exiting.
• Be sure to disconnect the safety belt before
exiting the cab.
• Be sure that the safety belt is fully retracted
and out of the way prior to entering or
exiting the cab.
• Do not put your foot on any surface that
does not have slip-resistant, self-cleaning
material. If there is no step material, the
surface may be slippery and you could fall.
• Before entering or exiting, be certain that
your shoes or boot soles are free from
grease, mud or any other substance which
could make them slippery.
•
Always put your foot flat on the top of the
step. Do not place your foot on the side or
edge of the step.
Driver Side Entry / Exit
Open the door. Place any hand-carried items
on the cab floor or in the seat. Grasp the right
grab handle with your right hand and the door
hand grip with your left hand. Put your right
foot fully on the bottom step (Figure 11). Pull
yourself up to the opening and place your left
foot fully on the second step.
Figure 11
Slide your hand up on the cab handle, if
necessary. Shift your left hand from the door
hand grip to the inside handle, as shown.
Step into the cab with your right foot first.
To exit, reverse the process. Do not attempt
to exit the cab while carrying any items in your
hands.
AWE 00054 Rev. 002
13
autocartruck.com
ACTT Xspotter Operator Manual
Summary of Contents for Xspotter 2014
Page 2: ......
Page 4: ...This page left blank intentionally ...
Page 116: ...Notes 877 973 3486 AWE 00054 Rev 002 104 ACTT Xspotter Operator Manual ...
Page 117: ......
