SAFETY FEATURES
Safety belts
General
DANGER
Safety belts must be properly worn at all
times by the driver and passenger while
the vehicle is in motion. Failure to do so
can result in serious personal injury or
death in the event of a collision.
Fasten the safety belt before starting
to drive. Trying to fasten the safety belt
while the vehicle is moving may lead
to an accident, and can cause serious
personal injury or death.
Safety belt assemblies (Figure 29) installed
in this vehicle meet FMVSS 209 “Type 1” and
“Type 2” requirements. They are recommended
for all persons weighing over 50 lbs (25 kg).
Figure 29
A separate child restraint system should also
be provided for each child weighing 50 lbs.
(25 kg) or less. It should meet the requirements
of FMVSS 213, “Child Restraint System.”
Carefully read and follow all manufacturer’s
instructions on installation and use. While the
vehicle is in motion, make certain the child
remains in the restraint system.
Safety belts must be worn by the driver and
passenger at all times. Before adjusting
or fastening the safety belt, move the seat
forward or rearward and adjust the seat height
as necessary. Sit erect and adjust the seat
cushion and seat back for a comfortable driving
position (Figure 30). In the event of a collision,
a correct driving position maximizes the
effectiveness of the safety belt.
Figure 30
AWE 00054 Rev. 002
29
autocartruck.com
ACTT Xspotter Operator Manual
Summary of Contents for Xspotter 2014
Page 2: ......
Page 4: ...This page left blank intentionally ...
Page 116: ...Notes 877 973 3486 AWE 00054 Rev 002 104 ACTT Xspotter Operator Manual ...
Page 117: ......
