Auto-Sleepers Symbol Plus 2018, Manual

Page: 101 / 126

9-37
FITTED EQUIPMENT
SLEEPING ARRANGEMENTS
Single bed
Nearside - Release the catch on the front
inboard corner of the seat and slide forward
to it’s fullest extent allowing the cushions to
fall into place. Arrange the cushion behind
the seat to complete the bed make up.
Offside - Slide the driver’s seat fully forward.
Remove the infill cushion stored on the
bottom of the wardrobe and with the board
lowermost, slide the board into the space
under the back of the seat, to extend the
length of the bed. Remove the backrest
cushion in order to maximize the bed width.
Transverse double bed
Release the catch on side of the nearside
rear seat and pull forward to its full extent.
Pull the sofa base and cushion towards the
centre of the vehicle until it meets the
nearside bed. Adjust the height of the support
legs if necessary. Arrange the sofa backrest
and infill cushions to fill the remaining gap.