Auto-Sleepers Symbol Plus 2018, Manual

Page: 75 / 126

9-11
FITTED EQUIPMENT
Air conditioning system
Icon Operating Description
mode
- OFF Fan is switched off. (only
selectable if no unit is in
operation).
a - -
b LOW Low fan level
c MID Medium fan level
d HIGH High fan level
e NIGHT Especially quiet fan
operation
Set time switch
- The time switch can only be selected if
the time has been set at the control
panel.
- When air conditioning systems are being
operated, the control panel time switch
must only be used to clearly define the
start and end time for a required period of
time.
- If the time switch has been activated
(ON), the deactivate time switch menu is
displayed first (OFF).
- Select icon in menu bar (4) with rotary
push button.
- Change by tapping in setting level.
Enter start time
- Set the hours then
the minutes with the
rotary push button.
Enter finish time
- Set the hours then
the minutes with the
rotary push button.
If the start/end point was exceeded during
entry, the operating parameters are not taken
into consideration until the next start/end
point has been reached. Until then, the
operating parameters that have been set
outside the time switch remain valid.
Set room temperature
- Select heating or air
conditioning system
using the rotary push
button, depending on
the unit that is
connected.
- Tap rotary push
button to confirm selection.
- Select required room temperature with
rotary push button.
- Tap rotary push button to confirm value.
Set hot water level
- Select required hot
water level with
rotary push button.
- Tap rotary push
button to confirm
value.
Select energy source
- Select required
energy source with
rotary push button.
- Tap rotary push
button to confirm
value.
The select energy type menu is displayed if a
heating system with electric heating elements
is connected.
Select fan level
- Select desired fan
level with rotary push
button.
- Tap rotary push
button to confirm
value.
The select fan level menu is only displayed if
heating system/hot water has been set.