Auto-Sleepers Symbol Plus 2018, Manual

Page: 73 / 126

9-9
FITTED EQUIPMENT
Select setting level
- Tap rotary push button.
The display shows the setting level. The first
icon flashes.
Change room temperature
- Select icon in menu bar (3) with rotary
push button.
- Change by tapping in setting level.
- Select between heating system
(HEATER) or air conditioning system
(AC) using the rotary push button,
depending on the unit that is connected.
- Tap rotary push button to confirm
selection.
- Select desired temperature with rotary
push button.
- Tap rotary push button to confirm value.
Heating system (HEATER)
Adjustable temperature range 5 - 30ºC (steps
of 1ºC)
a = Heating system * - Heating system is
switched on.
Note: Quick temperature change using rotary
push button possible (in Stand-by screen).
Air conditioning system (AC)
Adjustable temperature range 16 - 31ºC
(steps of 1ºC)
b = COOL * - Air conditioning system is
switched on
c = AUTO - Air conditioning system is set
to automatic
d = HOT - Air conditioning system is in
heating operation
e = VENT - Air conditioning system is in air
circulation mode
* This symbol flashes until the required room
temperature has been reached.
Change hot water level
- Select icon in menu bar (3) with rotary
push button.
- Change by tapping in setting level.
- Select desired level with rotary push
button.
- Tap rotary push button to confirm value.
a = Boiler * - Hot water generator is
switched on.
b = 40º ** - Hot water temperature 40ºC
c = 60º - Hot water temperature 60ºC
d = BOOST* - Targeted, rapid heating of
boiler contents (Boiler
priority) for a maximum time
window of 40 minutes. Then
the water temperature is kept
at the higher level for two
post-heating cycles (about
62ºC ). After reaching the
water temperature, heating of
the room continues.
* This symbol flashes until the required water
temperature has been reached.
** A hot water temperature of 40ºC can only
be maintained with combined room and water
heating for a limited time.
2
3
c d a b e
2
3
a b c d