9-35
FITTED EQUIPMENT
A screened changing area can be created at
the rear of the vehicle by first opening the
wardrobe door. The door of the tall cupboard
is then opened to rest against the wardrobe
door, and the flap is folded across to fill the
gap.
Lounge Area
The lounge area is at the front of the vehicle
and consists of an inward facing sofa on the
offside and a travelling seat on the nearside
which can be extended to form a bench seat
and a single bed. The offside sofa has a
slatted base which lifts up to provide access
to the heater, habitation battery and storage
area below. (In order to make lifting the base
easier it is recommended that the backrest is
first laid flat against the seat cushion).
The nearside seat can be converted into a
bench seat by releasing the lever on the
inside front corner and sliding forward,
allowing the cushions to fall into place. Under
this seat is a four bottle storage area
accessed by the drop down door at the front.
On the outside of the seat are switches for
the exterior awning light, the cab step LEDs
and a push button switch for the retractable
step.
All lighting throughout the vehicle is provided
by individually switched, LED powered
lamps, with large circular ones on the ceiling
and reading lamps above the seating areas
of the lounge. A roof mounted strip light is
fitted between the cab seats.
On the panel above the side door is located
the electrical control panel, with touch screen
and programmable control of all the vehicle’s
electrical services. It incorporates a fresh
water level indicator and master switches for
the water pump and 12 volt circuits. Adjacent
to this are the controls for the water and
space heater and also pre-wired connections
for a TV.
A fire extinguisher is fitted adjacent to the
driver’s seat.
Storage
Storage is provided by the cupboards,
lockers and within the settee bases.
Additional storage is available in the overcab
locker.
Heavy items must not be stored in any
overhead locker, nor in any storage area from
which they could come free and cause injury
to the occupants of the vehicle. Ensure all
cupboards are securely fastened before
moving off (i.e. that the push buttons are in
the ‘locked’ position).
Ensure any articles stowed below the cab
seats will not come loose when the vehicle is
being driven.
Summary of Contents for Symbol Plus 2018
