Auto-Sleepers Symbol Plus 2018, Manual

Page: 20 / 126

6-4
SAFETY & SECURITY
centre of the
Test/Reset
button briefly
to confirm
that the
detector is
operating
properly. The
sounder will
sound as
soon as the
button is
pressed and
the Alarm
LED will
illuminate red
indicating that
the sounder
is working
and the
power pack is
providing power to the unit. This test for
the sounder, power pack and circuitry
should be performed on a weekly basis.
This should be continued for the lifetime
of the product.
WARNING: Prolonged exposure to the
sounder in close proximity to your ears
may damage your hearing.
Under normal operating conditions the power
pack will last for the lifetime of the product, ie.
7 years.
The detector will not protect against the risk
of carbon monoxide poisoning when the
power pack has drained.
WARNING: Prolonged exposure to
extreme high or low temperature may
reduce the life of the power pack.
Power Pack Deactivation
Your CO-9X is portable, making it ideal for
taking with you on holiday. You will need to
deactivate your detector when travelling or
even when storing e.g. when decorating.
Fitting is the reverse of removal. To
deactivate the detector the two ends of the
metal clip must be inserted into the
corresponding holes in the disabling socket
located on the underside of the detector (see
Fig 2). You can ensure that the product is
Fig 1
Carbon Monoxide Alarm
A Fire Angel battery operated Carbon
Monoxide Poisonous Gas alarm is fitted to
your vehicle. Please read carefully the
manufacturers instructions supplied in order
to understand it’s operation.
Features
• An advanced electrochemical sensor
designed to accurately measure low
levels of carbon monixide (CO) providing
an early warning of toxic CO levels in
your motorhome.
• Detects carbon monoxide continuously.
• Resistant to false alarms caused by
normal household contaminants.
• Sounds a loud 85dB alarm (at 3 metres/
10 feet) to alert you in case of an
emergency.
• Test/Reset button.
• Regular self-check to ensure detector is
operating correctly.
• Simple to mount, portable, ideal for
travelling.
• Certified to European Carbon Monoxide
Alarm Standard BS EN 50291:2001.
• Seven year limited warranty (batteries
excluded).
Power Pack Activation
• Your detector comes complete with an
integrated power pack that will provide
power for its entire operational life. To
activate the power pack you need to pull
the disabling tab (see Fig 1). This will in
turn pull out the metal disabling clip,
which is attached to the end of the tab,
from the disabling socket which is
situated on the underside of the detector.
Retain the disabling tab for future use.
• When the detector is activated the Power
LED will begin to flash green once every
minute to indicate that the detector is
receiving power from the power pack and
is fully operational.
• Test the sounder, power pack and
circuitry by pressing and holding the