Auto-Sleepers Symbol Plus 2018, Manual

Page: 67 / 126

9-3
FITTED EQUIPMENT
IGNITING THE BURNERS
1. Fully press the button corresponding to
the burner you want to ignite and at the
same time turn it to the maximum
symbol.
2. At the same time, activate the electrical
ignition device by prolonged pressing on
the button positioned on the commands
front panel. The generator will emit a
rapid and repeated series of impulses.
3. After igniting, keep the knob fully pressed
for approx. 5 seconds, always pressing
to the max and then releasing it: this
release delay is used to heat the safety
thermocouple.
If on release of the knob, the burner does not
stay on, it means the thermocouple was not
sufficiently pre-heated. To solve the problem,
repeat operations 1, 2 and 3 keeping the
knob pressed for longer after igniting the
burner.
WARNING: Ignition must take place
without any pots or other objects on the
hob and on the burners.
FLAME ADJUSTMENT
4. Check the flame is regular and stable.
Then, turn the knob to the desired
position (MIN or MAX). You can position
the knob in the intermediate position,
between the maximum and minium, but
NOT between the maximum and “closed”
position (0º angle). If the flame is
irregular, check the correct positioning of
the gas rings and the caps.
COOKING
5. Position saucepans on the burner when
on; never leave burners on without pans
or with empty pans.
Only use saucepans, pans and accessories
expressly design for this use, made from
materials resistant to high temperatures and
suitable for contact with food.
For more efficient burners, you are advised to
use containers with a diameter suitable for
the type of burner chosen, to obtain
maximum performance with minimum gas
consumption.
IGNITION OF THE OVEN BURNER AND
ITS ADJUSTMENT
1. Fully press the knob corresponding to the
oven burner and turn it to an angled
position of 50º.
2. At the same time, activate the electronic
ignition device by prolonged pressing on
the button positioned on the commands
front panel. The generator will emit a
rapid and repeated series of impulses.
3. On ignition, proceed to adjust the oven
by turning the knob to the desired
temperature level as indicated on the
graduated ring nut around the thermostat
knob.
If on release of the knob, the burner does not
stay on, it means the thermocouple was not
sufficiently pre-heated. To solve the problem,
repeat operations 1, 2 and 3 keeping the
knob pressed for longer after igniting the
burner.
WARNING: Ignition must take place
without any food or saucepans in the
oven/grill compartment.
The oven burner and the grill burner
cannot work simultaneously.
For rational energy use, you are advised to
cook with saucepans covered with the lid
supplied and reduce the flame as necessary
to bring to and maintain boil, avoiding
pointless overheating of cooking liquids.
WARNING: The flame must never protrude
from the bottom of the saucepan.
Ensure the cooking containers rest
correctly on the grate without wobbling.
The saucepans must be centred to the
burner and they must not protrude from
the grate. Use is not permitted of the
appliance without the grate or with heat
diffusers or reducers different from those
purchasable from the dealer.